Registering a Handset with the W60B
Registering a Handset with the W60B
How to register a Yealink handset with a single W60B or multiple base stations
The following steps may also apply to Yealink models W52B and W80B.
With a Single W60B
- Hold down the Connect button (approximately 3 seconds) on the base until the top light of the three green lights starts blinking.
- On the handset, there should be a message that states "Unregistered!". Press the button on the bottom left of the screen labeled Reg.
- With the base in pairing mode, the handset with search for it, and attempt to connect automatically.
- Upon success, the phone will display a message confirming successful registration.
With Multiple Base Stations
- Press the OK button on the handset to open the phone's main menu.
- Navigate to Settings and press OK.
- In settings, navigate down to Registration (or press 6 on the dialpad).
- Navigate to Register Handset.
- On the Yealink Base, hold down the Connect (approximately 3 seconds) button until the top green light starts flashing.
- Select the next empty Base #.
- Wait for the Searching dialog to complete.
- Press OK on the Subscribe Base screen, followed by your pin (default is 0000).
- You should now be paired with the additional base.
Related Articles
Yealink Portable Handset Pairing
Pairing Pairing To A Single Base Station (W60B shown) On the base station, hold down the Connect button for 2 seconds until the top light of the three green lights starts blinking. On the handset, there should be a message that states ...Using Call Park on a Yealink cordless handset phone
Call Park On A Cordless Handset Phone To transfer an active call into a parking space, you will press the TRAN key on the phone, dial the parking space, then press the Transfer key. Example: Parking the active call into parking space 1 Press TRAN key ...Getting Started With Your Poly D230 DECT IP Phone
The Poly D230 is a long-range cordless DECT IP phone designed for mobility around the home or office. This guide walks you through assembly, connections, handset and base features, provisioning behavior, and verification on the PENGUIN VoIP platform. ...Initiate Transfer (Yealink Phones)
How to Initiate a Transfer Using a Yealink Phone (Works with Models T42/T46/ T48) There are two call transfer options - assisted transfer and blind transfer. An assisted transfer is when you notify the person you are transferring the call before they ...Call Park
Using Call Park On Any Phone This article is applicable to all phone models as Call Park works on all phones. How to use Call Park differs slightly when using a Yealink cordless handset due to its programmable button limitations. See this article for ...